Four Unit Rowhouse
Detailed design, drawings, and specifications for Uprising Homes Inc.'s four unit rowhouse development at 2502 16a Street S.E., Calgary, Alberta.
Project Overview
This four unit rowhouse project comprises units #1, #2, #3, and #4 at 2502 16a Street S.E., Calgary, Alberta. The drawing set includes full architectural plans, elevations, sections, assemblies, and schedules that detail the structural, mechanical, and building envelope design.
The documentation has been prepared in accordance with the latest National Building Code requirements and includes notes for framing, insulation, HVAC, window and door schedules, and wall/roof assemblies. All work must be coordinated on site with the contractor, trades, and consultants prior to construction.
Important: Drawings are not to be scaled. All dimensions and conditions must be verified on site. Any discrepancies must be reported to the designer for resolution before proceeding.
Building Code
Main Dwelling:
- Applicable Code: The NBC 2023 AE
- Occupancy Classification: GROUP C (Residential Occupancy)
- Building Classification: The building conforms with the requirements of Part 9 Division B of the NBC 2023 AE (3.2.2.90)
- 3 storeys or less in building height
- Building area not exceeding 600 square metre
- Used for major occupancy classified as GROUP C
Garage:
- Applicable Code: The NBC 2023 AE
- Occupancy Classification: GROUP F (Division 3 Storage Garages)
- Building Classification: The building conforms with the requirements of Part 9 Division B of the NBC 2023 AE (1.3.3.3.)
- Storage garages up to 22m high
List of Drawings
- A-0.0 Cover Page
- A-0.1 Assemblies
- A-1.0 Foundation Plan
- A-1.1 Basement Plan
- A-1.2 Main Floor Plan
- A-1.3 Upper Floor Plan
- A-1.4 Roof Plan
- A-2.0 Front & Right Elevation
- A-2.1 Rear & Left Elevation
- A-2.2 Enlarged Elevations
- A-3.0 Garage Plans and Details
- A-3.1 Garage Elevations & Section
- A-4.0 Section 1
- A-4.1 Section 2 & 3
- A-5.0 Above Ground & Roof Detail
- A-5.1 Foundation Detail
- A-5.2 Tall Wall Details
- A-5.3 Tall Wall Detail 2
- A-5.4 Party Wall Details
- A-5.5 Air Barrier, Window, Jamb & HRV Details
- E-1.0 Basement Electrical
- E-1.1 Main Electrical
- E-1.2 Upper Electrical
Floor Areas
Unit #1
Basement: 651.88 sq. ft.
Main: 651.88 sq. ft.
Upper: 692.24 sq. ft.
Total: 1344.12 sq. ft.
Unit #2
Basement: 644.79 sq. ft.
Main: 644.79 sq. ft.
Upper: 677.99 sq. ft.
Total: 1322.78 sq. ft.
Unit #3
Basement: 644.79 sq. ft.
Main: 644.79 sq. ft.
Upper: 677.99 sq. ft.
Total: 1322.78 sq. ft.
Unit #4
Basement: 666.21 sq. ft.
Main: 666.21 sq. ft.
Upper: 693.04 sq. ft.
Total: 1359.25 sq. ft.
Project Information
Municipal Address: 2502 16a Street S.E., Calgary, Alberta
Project: Four Unit Rowhouse
Project Number: 174-23
Status: Concept
General Notes
- Do not scale drawings.
- Drawings are to be read in conjunction with all other applicable consultant drawings.
- Contractor is to confirm and coordinate all details with site conditions and other consultant drawings prior to starting construction.
- John Trinh & Associates Inc. assumes no responsibility, implied or direct, unless the drawings bear the seal and signature of a registered professional.
- All framing, electrical rough-in and plumbing rough-in needs to be confirmed by trades/contractor and home owner. Any issue needs to be notified to the designer to be resolved before proceeding.
- All work must comply with the most recent edition of the National Building Code (AE) and any other governing authorities.